Back to Home

🚫 Discard Show Units

Critical Administrative Control - Master Switch for Client Access Management

← Back to Units Home
📋 Overview - Critical System Function

⚠️ CRITICAL SYSTEM FUNCTION - HANDLE WITH EXTREME CAUTION

This section contains a highly sensitive function that will immediately affect all client access to units across your entire system. Please read and understand completely before taking any action.

🎯 Primary Function

The Discard View to Client section is an extremely powerful and sensitive administrative tool that provides system-wide control over client access to unit inventory. This critical function serves as a master switch that can instantly modify the visibility of all units to all clients across your entire property portfolio with a single action.

🎯 الوظيفة الأساسية

قسم إخفاء العرض عن العميل هو أداة إدارية قوية وحساسة للغاية توفر تحكمًا شاملاً في وصول العملاء إلى مخزون الوحدات. تعمل هذه الوظيفة الحرجة كمفتاح رئيسي يمكنه تعديل ظهور جميع الوحدات لجميع العملاء في كامل النظام بضغطة واحدة.

⚡ Core Function Characteristics

🎯 Single Function - Maximum Impact

This section contains only one function, but it is arguably one of the most critical and far-reaching administrative actions available in the entire system. The "Discard View to Client" function has the power to fundamentally alter how clients interact with your property inventory in an instant.

يحتوي هذا القسم على وظيفة واحدة فقط، لكنها من أكثر الإجراءات الإدارية حساسية وتأثيرًا في النظام. وظيفة "إخفاء العرض عن العميل" لديها القدرة على تغيير طريقة تفاعل العملاء مع مخزون العقارات بشكل جذري وفوري.

🚫 Complete Client Access Revocation

When this function is executed, it immediately removes access to all units from all clients system-wide. This means that every client who previously had access to view specific units will lose that access completely, regardless of their previous permissions, assigned units, or ongoing transactions.

عند تنفيذ هذه الوظيفة، يتم فورًا إزالة وصول جميع العملاء إلى جميع الوحدات في النظام. هذا يعني أن كل عميل كان لديه سابقًا صلاحية عرض وحدات معينة سيفقد هذا الوصول تمامًا بغض النظر عن الصلاحيات أو التعيينات السابقة أو المعاملات الجارية.

🌐 Understanding the Scope

This action affects every single client in your entire database simultaneously. There are no exceptions, exclusions, or partial implementations. All clients lose access to all units immediately upon execution.

يؤثر هذا الإجراء على كل عميل في قاعدة بياناتك بالكامل في نفس الوقت. لا توجد استثناءات أو استبعادات أو تنفيذ جزئي. يفقد جميع العملاء الوصول إلى جميع الوحدات على الفور عند التنفيذ.

⚡ Immediate and Comprehensive Effects

🚀 Immediate and Comprehensive Effect

The moment you execute this function, the following changes occur instantly across your entire system:

🚀 أثر فوري وشامل

في اللحظة التي تنفذ فيها هذه الوظيفة، تحدث التغييرات التالية على الفور في جميع أنحاء نظامك:

🔒 Universal Access Removal

Every client account will be immediately stripped of access to view any unit information, unit details, pricing, availability, or any other unit-related content. This includes clients who may have been in the middle of viewing units, comparing options, or considering purchases.

سيتم على الفور تجريد كل حساب عميل من الوصول إلى عرض أي معلومات عن الوحدات، تفاصيل الوحدات، التسعير، التوافر، أو أي محتوى آخر متعلق بالوحدات. يشمل هذا العملاء الذين قد يكونون في منتصف عرض الوحدات، مقارنة الخيارات، أو التفكير في الشراء.

🙈 Complete Inventory Concealment

All units across all projects, buildings, and developments become completely invisible to all clients. No unit listings, search results, or unit displays will be available to any client through any client-facing interface.

تصبح جميع الوحدات عبر جميع المشاريع والمباني والتطورات غير مرئية تمامًا لجميع العملاء. لن تكون هناك قوائم وحدات، نتائج بحث، أو عروض وحدات متاحة لأي عميل من خلال أي واجهة موجهة للعملاء.

⚡ Immediate System-Wide Implementation

The changes take effect immediately without delay, grace period, or transition time. There is no gradual implementation or soft rollout - the effect is instant and comprehensive.

تدخل التغييرات حيز التنفيذ على الفور دون تأخير أو فترة سماح أو وقت انتقال. لا يوجد تنفيذ تدريجي أو طرح ناعم - التأثير فوري وشامل.

🚫 Zero Client Access State

After execution, your system enters a state where no client has access to view any units whatsoever. This creates a completely restricted environment where units are only accessible through administrative interfaces.

بعد التنفيذ، يدخل نظامك في حالة لا يملك فيها أي عميل الوصول إلى عرض أي وحدات على الإطلاق. يخلق هذا بيئة مقيدة تمامًا حيث تكون الوحدات متاحة فقط من خلال واجهات الإدارة.

🔧 Post-Execution Client Management

📋 Post-Execution Client Management

After using this function, client access must be manually restored on an individual basis:

📋 إدارة عملاء ما بعد التنفيذ

بعد استخدام هذه الوظيفة، يجب استعادة وصول العملاء يدويًا على أساس فردي:

🎯 Individual Unit Assignment Requirement

To restore client access to units, you must manually assign specific units to specific clients. This assignment process must be completed individually for each client who should have access to units.

لاستعادة وصول العميل إلى الوحدات، يجب عليك تعيين وحدات معينة يدويًا لعملاء معينين. يجب إكمال عملية التعيين هذه بشكل فردي لكل عميل يجب أن يكون لديه وصول إلى الوحدات.

🚫 No Automatic Restoration

There is no bulk restoration function or automatic recovery process. Each client's access must be deliberately and manually restored through individual assignment processes.

لا توجد وظيفة استعادة جماعية أو عملية استرداد تلقائية. يجب استعادة وصول كل عميل عن عمد ويدويًا من خلال عمليات التعيين الفردية.

🎛️ Selective Access Control

The post-execution state allows for complete control over which clients can see which units. You can choose to give some clients access to certain units while leaving others without any access at all.

تتيح الحالة بعد التنفيذ التحكم الكامل في العملاء الذين يمكنهم رؤية أي وحدات. يمكنك اختيار منح بعض العملاء الوصول إلى وحدات معينة مع ترك الآخرين بدون أي وصول على الإطلاق.

🛡️ Administrative Control Retention

While client access is completely removed, administrative access to units remains intact. Sales teams and administrators can still view, manage, and work with all units through administrative interfaces.

بينما يتم إزالة وصول العملاء تمامًا، يظل الوصول الإداري إلى الوحدات سليمًا. يمكن لفرق المبيعات والمديرين عرض جميع الوحدات وإدارتها والعمل عليها من خلال واجهات الإدارة.

🎯 Strategic Use Cases & Best Practices

📈 Strategic Use Cases for This Function

Use this function when you need to completely reorganize client access permissions, secure all unit information, or implement new access policies across your entire database.

📈 حالات الاستخدام الاستراتيجية لهذه الوظيفة

استخدم هذه الوظيفة عندما تحتاج إلى إعادة تنظيم صلاحيات وصول العملاء بالكامل، أو تأمين جميع معلومات الوحدات، أو تطبيق سياسات وصول جديدة على قاعدة البيانات بالكامل.

💡 Best Practice Recommendation

Before executing this function, create a detailed plan for post-execution client access restoration, including priority lists, assignment strategies, and communication protocols to minimize business disruption.

🎯 Summary

The Discard View to Client function represents the ultimate administrative control tool for client access management, providing immediate and comprehensive control over unit visibility across your entire system with the power to reset all client permissions instantly.

🎯 الخلاصة

تمثل وظيفة إخفاء العرض عن العميل أداة التحكم الإدارية القصوى لإدارة وصول العملاء، حيث توفر تحكمًا فوريًا وشاملاً في ظهور الوحدات عبر النظام بالكامل مع القدرة على إعادة تعيين جميع صلاحيات العملاء فورًا.

📸 System Interface

🖥️ Discard View to Client Interface

Below is the actual interface where this critical function is executed. Handle with extreme caution.

Discard View to Client Section Guide

Click image to view in full size